1510E VWR Scientific Products Incubator For Sale
In Great Condition! Clean & Fully Functional! (Please note there is one shelf clip missing. This could be added from your own inventory if needed, however.)
1510E VWR Scientific Products Incubator
Volume: 56.6 L (2 cu ft)
Electrical: 110V 50/60Hz, 300W
Interior Dimensions - W x D x H: 43 x 30.5 x 43 cm (17 x 12 x 17")
Exterior Dimensions - W x D x H: 55.9 x 40.6 x 67.3 cm (22 x 16 x 26")
Monday, December 27, 2010
Sunday, December 26, 2010
Pelton & Crane OCM Autoclave / Sterilizers For Sale
Pelton & Crane OCM Autoclave / Sterilizers For Sale
Pelton and Crane OCM Autoclave / Sterilizer works like new as seen in the pictures notice EVERYTHING works including the gauges. (recently replaced the pressure gauge and bellows) this is not a "tested" unit like others that heat up but do not actually hold pressure and cycle like they are supposed to or leak from the door seal. This unit is 100% working (see temp and pressure in pictures) with no problems ready to go to work.
Pelton and Crane OCM Autoclave / Sterilizer works like new as seen in the pictures notice EVERYTHING works including the gauges. (recently replaced the pressure gauge and bellows) this is not a "tested" unit like others that heat up but do not actually hold pressure and cycle like they are supposed to or leak from the door seal. This unit is 100% working (see temp and pressure in pictures) with no problems ready to go to work.
TUTTNAUER 1730MK VALUEKLAVE PORTABLE AUTOCLAVE 1730 For Sale
TUTTNAUER 1730MK VALUEKLAVE PORTABLE AUTOCLAVE 1730 FOR SALE
Tuttnauer MK Series Manual Autoclave - 7.5 Liter
The MK Series offers a manual autoclave with quick cycle benefits. Total sterilization cycle time is reduced by 50%. This quick-cycle turnaround is perfect for instruments or a high-volume office.
Tuttnauer MK Series Manual Autoclave - 7.5 Liter
The MK Series offers a manual autoclave with quick cycle benefits. Total sterilization cycle time is reduced by 50%. This quick-cycle turnaround is perfect for instruments or a high-volume office.
Axiovert 100 Zeiss microscope 4 objectives For Sale
Axiovert 100 Zeiss microscope 4 objectives For Sale
ZEISS Inverted research microscope,
10x/20w Eyepieces
Comes with 4 Zeiss objectives;
1) Achrostigmat 10x/0.25, infinity +/-, Ph1 LD
2) Achrostigmat 20x/0.30, infinity +/-, Ph1 LD
3) Achrostigmat 32x/0.40, infinity +/-, Ph1 LD
4) A-PLAN 40x/0.50 Ph2 LD
Condenser DIC and phase1 and 2
HBP 100 Watt Lamp Box
Voltage 110V/220V.
All in a perfect state
ZEISS Inverted research microscope,
10x/20w Eyepieces
Comes with 4 Zeiss objectives;
1) Achrostigmat 10x/0.25, infinity +/-, Ph1 LD
2) Achrostigmat 20x/0.30, infinity +/-, Ph1 LD
3) Achrostigmat 32x/0.40, infinity +/-, Ph1 LD
4) A-PLAN 40x/0.50 Ph2 LD
Condenser DIC and phase1 and 2
HBP 100 Watt Lamp Box
Voltage 110V/220V.
All in a perfect state
ALL AMERICAN ELECTRIC PRESSURE STEAM STERILIZER 25X
december 26 2010 -For Sale - ALL AMERICAN ELECTRIC PRESSURE STEAM STERILIZER 25X
YOUR BIDDING ON A GENTLY USED LIKE NEW ALL AMERICAN PRESSURE STEAM STERILIZER,ITS A MODEL 25X HAS ALL THE ORIGINAL INSTRUCTIONS.AND ITS COMPLETE!!!IT ALSO COMES WITH THE SUPPORT BASE,ITS A NO 2180 SUPPORT FOR THE 25X. MADE BY WISCONSIN ALUMINUM FOUNDRY CO.
YOUR BIDDING ON A GENTLY USED LIKE NEW ALL AMERICAN PRESSURE STEAM STERILIZER,ITS A MODEL 25X HAS ALL THE ORIGINAL INSTRUCTIONS.AND ITS COMPLETE!!!IT ALSO COMES WITH THE SUPPORT BASE,ITS A NO 2180 SUPPORT FOR THE 25X. MADE BY WISCONSIN ALUMINUM FOUNDRY CO.
Friday, December 24, 2010
Two Westinghouse 1600AF circuit breakers for sale
Two Westinghouse 1600AF circuit breakers
Two motor operated Westinghouse DS 1600AF/1000AT rack in circuit breakers. In original boxes never put in service. They have been sitting on a shelf in our warehouse. FN# 6616C27G03; GO# 33UD77150; option 21303-72040-68610-00010; 1600AF; digitrip RMS 500 trip unit; cat # 152CLSI; trip plug cat# PD6D16A100; shunt trip 120VAC; motor operator 120VAC.
Two motor operated Westinghouse DS 1600AF/1000AT rack in circuit breakers. In original boxes never put in service. They have been sitting on a shelf in our warehouse. FN# 6616C27G03; GO# 33UD77150; option 21303-72040-68610-00010; 1600AF; digitrip RMS 500 trip unit; cat # 152CLSI; trip plug cat# PD6D16A100; shunt trip 120VAC; motor operator 120VAC.
Tektronix TDS2024 4Channel 200Mhz Oscilloscope For Sale
Tektronix TDS2024 4Channel 200Mhz Oscilloscope For Sale
With up to 200 MHz bandwidth and 2 GS/s maximum sample rate, no other color digital storage oscilloscope offers as much bandwidth and sample rate for the price. The TDS1000 and TDS2000 Series oscilloscopes provide accurate real-time acquisition up to their full bandwidth. These instruments offer advanced triggering, such as pulse width triggering and line-selectable video triggering, and 11 standard automatic measurements on all models. The Fast Fourier Transform (FFT) math function allows the user to analyze, characterize and troubleshoot circuits by viewing frequency and signal strength (standard).
With up to 200 MHz bandwidth and 2 GS/s maximum sample rate, no other color digital storage oscilloscope offers as much bandwidth and sample rate for the price. The TDS1000 and TDS2000 Series oscilloscopes provide accurate real-time acquisition up to their full bandwidth. These instruments offer advanced triggering, such as pulse width triggering and line-selectable video triggering, and 11 standard automatic measurements on all models. The Fast Fourier Transform (FFT) math function allows the user to analyze, characterize and troubleshoot circuits by viewing frequency and signal strength (standard).
Fluke ScopeMeter 199C 200MHz 2.5GS/s colour For Sale
Fluke ScopeMeter 199C 200MHz 2.5GS/s colour, calibrated For Sale
Fluke ScopeMeter 199C, top of the range 200MHz 2.5GS/s colour, 2 isolated channels. Full-featured scope and meter plus trend recorder (see spec below).
Complete kit including ScopeMeter, hard case, FlukeView software version 4.5, optical interface lead, set of scope probes, set of meter leads, mains charger (European 220v). All accessories are unopened and unused. All manuals and registration documents are included. This is a customer return but appears to have never been used. There is not a mark on any of the items. The original packaging is included.
Fluke ScopeMeter 199C, top of the range 200MHz 2.5GS/s colour, 2 isolated channels. Full-featured scope and meter plus trend recorder (see spec below).
Complete kit including ScopeMeter, hard case, FlukeView software version 4.5, optical interface lead, set of scope probes, set of meter leads, mains charger (European 220v). All accessories are unopened and unused. All manuals and registration documents are included. This is a customer return but appears to have never been used. There is not a mark on any of the items. The original packaging is included.
Thursday, December 23, 2010
ONAN 35KW STANDBY BACKUP GENSET GENERATOR FOR SALE
ONAN 35KW STANDBY BACKUP AUTOMATIC GENSET GENERATOR ATS FOR SALE
Up for your consideration is a used Cummins/Onan genset. It is rated 35kw three phase or 23.5kw single phase. Please see tag for voltage and current ratings. The unit has 394 hours of use and is in excellent running and operating condition. There is some surface rust on the exterior panels but is otherwise great shape. The unit was pulled from a company that was relocating and could not bring it with them. Included is the transfer switch and a gas regulator. The genset was properly maintained by a local generator company. Model: GGFD 4491256 | Serial number: K000175730
Up for your consideration is a used Cummins/Onan genset. It is rated 35kw three phase or 23.5kw single phase. Please see tag for voltage and current ratings. The unit has 394 hours of use and is in excellent running and operating condition. There is some surface rust on the exterior panels but is otherwise great shape. The unit was pulled from a company that was relocating and could not bring it with them. Included is the transfer switch and a gas regulator. The genset was properly maintained by a local generator company. Model: GGFD 4491256 | Serial number: K000175730
PHOENIX MAX HT 200 DEHUMIDIFIER - DRI EAZ Sale
PHOENIX MAX HT 200 DEHUMIDIFIER - DRI EAZ FOR SALE
This auction is for one USED PHOENIX 200 HT w/668 hrs
This auction is for one USED PHOENIX 200 HT w/668 hrs
Commercial Floor and Carpet Cleaning System For Sale
Commercial Floor/Carpet Cleaning System For Sale
It's a Kaivac Standard (Model KV-120) unit that was purchased new in February 0f 2003. The original invoice, which is all the paperwork I have (We can't find the manuals), indicates that the package cost new $4,524.70. What you see in the pictures is all you get.
It's a Kaivac Standard (Model KV-120) unit that was purchased new in February 0f 2003. The original invoice, which is all the paperwork I have (We can't find the manuals), indicates that the package cost new $4,524.70. What you see in the pictures is all you get.
Wednesday, December 22, 2010
Boring Mill, Horizontal Lucas 4" For Sale
Boring Mill, Horizontal Lucas 4" For Sale
Lucas 4" Table Type Horizontal Boring Mill
Spindle Dia: 4"
X Cross Feed Travel: 48"
Y Travel Height: 34"
Z Table Travel: 94"
W Spindle Travel: 31"
Spindle Taper: #6 Morse
Voltage: 208/220V 3 Phase
Horsepower: 10 HP
Lucas 4" Table Type Horizontal Boring Mill
Spindle Dia: 4"
X Cross Feed Travel: 48"
Y Travel Height: 34"
Z Table Travel: 94"
W Spindle Travel: 31"
Spindle Taper: #6 Morse
Voltage: 208/220V 3 Phase
Horsepower: 10 HP
MAZAK VQC 15/40 CNC MILLING MACHINE For Sale
MAZAK VQC 15/40 CNC MILLING MACHINE For Sale
MODEL VQC 15/40 SER. NO. 65399 PURCHASED NEW IN 1986
MAZATROL CAM M-2 CONTROL WITH RS-232 PORT
16 STATION ATC
5-7.5 SPINDLE DRIVE MOTOR
CAT 40 SPINDLE TAPER
660 LBS TABLE CAPACITY
MODEL VQC 15/40 SER. NO. 65399 PURCHASED NEW IN 1986
MAZATROL CAM M-2 CONTROL WITH RS-232 PORT
16 STATION ATC
5-7.5 SPINDLE DRIVE MOTOR
CAT 40 SPINDLE TAPER
660 LBS TABLE CAPACITY
Sunday, December 19, 2010
80 Gallon Stainless Steel Tank Explosion Proof Lid For Sale
80 Gallon Stainless Steel Tank w/ Explosion Proof Lid
80 Gallon Stainless Steel Tank w/ Explosion Proof Lid & XT-800 Gems Sensors Level Sensor
Safe Fill Capacity: 80 Gallons
Total Capacity: 100 Gallons
80 Gallon Stainless Steel Tank w/ Explosion Proof Lid & XT-800 Gems Sensors Level Sensor
Safe Fill Capacity: 80 Gallons
Total Capacity: 100 Gallons
Tank 150 Gal. Stainless Steel Storage Tank Sale
Tank 150 Gal. Stainless Steel Storage Tank For Sale
150 Gallon Stainless Steel Vertical Storage Tank. Overall Dims- 40" Diam X 48" straightwall X 80" overall Heigth. manway on top. Includes 3 Mild Steel legs. Outlet- 2 1" outlets. Flat bottom.
150 Gallon Stainless Steel Vertical Storage Tank. Overall Dims- 40" Diam X 48" straightwall X 80" overall Heigth. manway on top. Includes 3 Mild Steel legs. Outlet- 2 1" outlets. Flat bottom.
Federal Pacific Electrical Breakers Surplus Sale Dec 18 2010
December 19 2010 - Surplus Electrical Inventory Sale | Federal Pacific Electrical Breakers - Various Amps
1,100 Gal. Stainless Steel Tank, Flat Bottom Sale
1,100 Gal. Stainless Steel Tank, Flat Bottom For Sale
Used 1,100 Gal. Stainless Steel Storage Tank, 4' Dia. x 12' Straight Side, Flat Bottom With Secure Down Lugs, Cone Top With Manway-No Cover, 2" Threaded Bottom Side Nozzle. Tank Has A Level Stainless Steel Float-No Controls.
Used 1,100 Gal. Stainless Steel Storage Tank, 4' Dia. x 12' Straight Side, Flat Bottom With Secure Down Lugs, Cone Top With Manway-No Cover, 2" Threaded Bottom Side Nozzle. Tank Has A Level Stainless Steel Float-No Controls.
Honey Bottling Tank Stainless Steel 100 lb Beekeeping For Sale
Honey Bottling Tank Stainless Steel 100 lb Beekeeping For Sale
Up for auction is a new stainless settling and/or bottling tank for your honey. The tank measures 22" by 12" and holds approximately 110 lbs of honey. This tank has a 1 1/2" plastic gate and comes with a lid. The lid is held in place by 3 clasps. The tank also has two handles for easy lifting. This tank would work nicely as a grocers tank or for bulk honey dispensing in a customers container
Up for auction is a new stainless settling and/or bottling tank for your honey. The tank measures 22" by 12" and holds approximately 110 lbs of honey. This tank has a 1 1/2" plastic gate and comes with a lid. The lid is held in place by 3 clasps. The tank also has two handles for easy lifting. This tank would work nicely as a grocers tank or for bulk honey dispensing in a customers container
Saturday, December 18, 2010
Inventory of Used Plastic Granulators For Sale Dec 18 2010
December 18 2010
Used and Surplus Process Equipment Sale -
Inventory of Used Plastic Granulators For Sale - Various Makes and Models
Used and Surplus Process Equipment Sale -
Inventory of Used Plastic Granulators For Sale - Various Makes and Models
Used Plastic Extruder Surplus Sale Dec 18 2010
December 18 2010 - Used Process Equipment Sale - Used Plastic Extruders - various make and models for sale
Friday, December 17, 2010
Surplus Military and Government Laboratory Equipment Sale
December 17 2010
Surplus Military and Government Laboratory Equipment For Sale - See used equipment inventory below:
Surplus Military and Government Laboratory Equipment For Sale - See used equipment inventory below:
Used Lab Equipment - Hot Plates Sale Dec 17 2010
December 17, 2010 - Used Laboratory Equipment For Sale:
Large surplus inventory of laboratory hot plates for sale - Many makes of hot plates are up for auction including Thermolyne, Fisher Scientific, Corning, Barnstead, Whatman, VWR Scientific, Thermix, and more.
Used Laboratory Hot Plates - Large Inventory For Sale Here!
Large surplus inventory of laboratory hot plates for sale - Many makes of hot plates are up for auction including Thermolyne, Fisher Scientific, Corning, Barnstead, Whatman, VWR Scientific, Thermix, and more.
Used Laboratory Hot Plates - Large Inventory For Sale Here!
Surplus Oscilloscope Inventory Sale Dec 17 2010
December 17 2010
Used Surplus and New Oscilloscopes - various makes and models up for auction, see inventory list below:
Used Surplus and New Oscilloscopes - various makes and models up for auction, see inventory list below:
Surplus Industrial Lightnin Mixers Sale Dec 17 2010
December 17 2010
Industrial and process used equipment sale -
Used Lightnin Mixers and Various Surplus Parts - Bid now below:
Industrial and process used equipment sale -
Used Lightnin Mixers and Various Surplus Parts - Bid now below:
Surplus Heavy Duty Metal Storage Cabinets Sale Dec 17
December 17 2010 - industrial surplus sale -
Heavy Duty Metal Storage Cabinets For Sale:
Heavy Duty Metal Storage Cabinets For Sale:
Fluke Multimeter and Clamp Meter Surplus Sale Dec 17
December 17 2010
- Various Fluke Multimeters and Clamp Meters For Sale
- Various Fluke Multimeters and Clamp Meters For Sale
Tuesday, December 14, 2010
LAGUN 9" x 48" VARIABLE SPEED VERTICAL MILLING MACHINE Sale
LAGUN 9" x 48" VARIABLE SPEED VERTICAL MILLING MACHINE For Sale
Made by Republic-Lagun Machine Tool Company.
This is a used Variable Speed Vertical Milling Machine in working condition.
Model #: FTV-2 , Serial #: SE-16722
Made by Republic-Lagun Machine Tool Company.
This is a used Variable Speed Vertical Milling Machine in working condition.
Model #: FTV-2 , Serial #: SE-16722
Monday, December 13, 2010
2007 KUBOTA KX1213R4AS EXCAVATOR W/ THUMB AND CAB
2007 KUBOTA KX1213R4AS EXCAVATOR W/ THUMB AND CAB Sale
THIS IS A 2007 KUBOTA KX121-3 EXCAVATOR THAT HAS AN ENCLOSED CAB W/ HEAT AND AIR CONDITIONING. IT ALSO COMES WITH A HYDRAULIC THUMB AND 36" TRENCHING BUCKET. IT HAS 1,653 HOURS AND HAS ONLY HAD ONE OWNER, AND IS IN VERY GOOD CONDITION. IT ALSO FEATURES A FLOAT ANGLE BLADE WHICH ALLOWS THE BLADE TO GO RIGHT OR LEFT AS THE MACHINE MOVES FORWARD.
THIS IS A 2007 KUBOTA KX121-3 EXCAVATOR THAT HAS AN ENCLOSED CAB W/ HEAT AND AIR CONDITIONING. IT ALSO COMES WITH A HYDRAULIC THUMB AND 36" TRENCHING BUCKET. IT HAS 1,653 HOURS AND HAS ONLY HAD ONE OWNER, AND IS IN VERY GOOD CONDITION. IT ALSO FEATURES A FLOAT ANGLE BLADE WHICH ALLOWS THE BLADE TO GO RIGHT OR LEFT AS THE MACHINE MOVES FORWARD.
John Deere Unstyled Open Fan Shaft A sale
John Deere Unstyled Open Fan Shaft A
John Deere Unstlyed Open Fan Shaft A."1934"Tractor was totaly restored 11 months ago.Brass carb and tag.Correct Mag. but it is weak.All new tires front and rear on Factory round spokes with all good solid hubs no cracks or welds.Clucth has a good snap to it.Brakes work good. Has a RARE factory gas gauge.Has all the correct parts.Full of antifreeze.Tractor was painted last fall and have not run it sence paint, "all gas drained" so you are buying a non running tractor.
John Deere Unstlyed Open Fan Shaft A."1934"Tractor was totaly restored 11 months ago.Brass carb and tag.Correct Mag. but it is weak.All new tires front and rear on Factory round spokes with all good solid hubs no cracks or welds.Clucth has a good snap to it.Brakes work good. Has a RARE factory gas gauge.Has all the correct parts.Full of antifreeze.Tractor was painted last fall and have not run it sence paint, "all gas drained" so you are buying a non running tractor.
HARDINGE #HLV-H SUPER PRECISION TOOLROOM LATHE Sale
HARDINGE #HLV-H SUPER PRECISION TOOLROOM LATHE For Sale
This is a used Super Precision High Speed Toolroom Lathe in working condition.
Model #: HLV-H
Serial #: HLV-H-2178
The Hardinge HLV Toolroom Lathe sets the benchmark for high-quality toolroom turning.
The Super-Precision HLV-H Toolroom Lathe is versatile enough to produce a wide variety of parts with super-precise tolerances and fine surface finishes.
This is a used Super Precision High Speed Toolroom Lathe in working condition.
Model #: HLV-H
Serial #: HLV-H-2178
The Hardinge HLV Toolroom Lathe sets the benchmark for high-quality toolroom turning.
The Super-Precision HLV-H Toolroom Lathe is versatile enough to produce a wide variety of parts with super-precise tolerances and fine surface finishes.
Tolan Storage Tank Surplus Inventory Sale Dec 13 2010
December 13 2010
Used and Surplus Equipment Sale - Process equipment
Tolan Reactors of various sizes For Sale - See inventory listing below:
Used and Surplus Equipment Sale - Process equipment
Tolan Reactors of various sizes For Sale - See inventory listing below:
Sunday, December 12, 2010
NISSAN 15,500 LB FORKLIFT FORK LIFT TRUCK PNEUMATIC Sale
NISSAN 15,500 LB FORKLIFT FORK LIFT TRUCK PNEUMATIC
This is a mint condition 1996 NISSAN DF05N70V forklift that is in GREAT CONDITION. GREAT NEW AIR PNEUMATIC tires, 15,500 LB lift capacity, 2 stage CLEAR VIEW MAST mast (lots of visibility). mast lift height 196" and lowered mast height is 140". FULL FREE STORE. Automatic transmission. Strong NISSAN V6 diesel engine.
This is a mint condition 1996 NISSAN DF05N70V forklift that is in GREAT CONDITION. GREAT NEW AIR PNEUMATIC tires, 15,500 LB lift capacity, 2 stage CLEAR VIEW MAST mast (lots of visibility). mast lift height 196" and lowered mast height is 140". FULL FREE STORE. Automatic transmission. Strong NISSAN V6 diesel engine.
CLARK 180BD 18000lb FORKLIFT For Sale
CLARK 180BD 18000lb FORKLIFT For Sale - Auction ends Shortly
CLARK 180BD 18000lb DIESEL FORKLIFT NEEDS REPAIR, 4 CYL DETROIT DIESEL ENGINE, 4447 HOURS, 5 SPEED TRANSMISSION
CLARK 180BD 18000lb DIESEL FORKLIFT NEEDS REPAIR, 4 CYL DETROIT DIESEL ENGINE, 4447 HOURS, 5 SPEED TRANSMISSION
Delco 5300 Super Skid Hot Water Pressure Washer Trailer Sale
Delco 5300 Super Skid Hot Water Pressure Washer Trailer For Sale
Delco Cleaning Systems 5300 Super Skid - Works Great
PSI 3000 ,GPM 5, Nozzle Size 5.5, Engine Fuel Gas, Burner Fuel Diesel
Max Inlet Water Temp 140F, RPM 3450
Delco Cleaning Systems 5300 Super Skid - Works Great
PSI 3000 ,GPM 5, Nozzle Size 5.5, Engine Fuel Gas, Burner Fuel Diesel
Max Inlet Water Temp 140F, RPM 3450
Surplus Lightnin Mixer Sale Dec 12 2010
December 12 2010 -
Used and Surplus Equipment Sale
Used Lightnin Mixers and Various Surplus Parts - Bid now below:
Used and Surplus Equipment Sale
Used Lightnin Mixers and Various Surplus Parts - Bid now below:
CNC Lathes Turning Centers Surplus Inventory Sale Dec 12
December 12 2010 - Large Inventory of CNC Turning Centers Lathe For Sale - Current lots up for sale can be seen in inventory listing below
Surplus Oscilloscope Inventory Sale Dec 12 2010
December 12 2010
Used Surplus and New Oscilloscopes - various makes and models of ocilloscopes up for auction, see inventory list below:
Used Surplus and New Oscilloscopes - various makes and models of ocilloscopes up for auction, see inventory list below:
Plastic Injection Molding Machine Surplus Inventory Sale
December 12 2010 - Large Surplus Inventory of Used Plastic Injection Molding Machines - See plastic molding machine inventory below:
AutoRefractor Keratometer Surplus Inventory Sale
AutoRefractor Keratometer Surplus Inventory Sale
AXIS TSRK-1000 AUTO REF-KERATOMETER
Description: Various Measurements Supported - REF/KER/ bace curve of contact lense and corneal diameter ,Wide Measurement range - -25D to +22D
AXIS TSRK-1000 AUTO REF-KERATOMETER
Description: Various Measurements Supported - REF/KER/ bace curve of contact lense and corneal diameter ,Wide Measurement range - -25D to +22D
Medison SA8000 3D Ultrasound Machine W/3D probe
Medison SA8000 3D Ultrasound Machine W/3D probe for Sale
3D ultrasound machine Medison sonoace 800 for sale with the most resent software update excellent condition with abdominal 3d probe
3D ultrasound machine Medison sonoace 800 for sale with the most resent software update excellent condition with abdominal 3d probe
Saturday, December 11, 2010
Fermentor 27 gallon stainless fermenter brewing beer
Fermentor 27 gallon stainless fermenter brewing beer FOR SALE
Blichmann Engineering 27 gallon fermentor in great condition and only used for only 6 months
Blichmann Engineering 27 gallon fermentor in great condition and only used for only 6 months
BRIDGEPORT 9" x 42" SERIES I VERT MILLING MACHINE
BRIDGEPORT 9" x 42" SERIES I VERT MILLING MACHINE FOR SALE
Made in the U.S.A. by Bridgeport Machines Inc. of Bridgeport, Connecticut. This is a used Variable Speed Vertical Milling Machine in GREAT condition. Model #: Series I , Serial #: 12/BR 229755
Made in the U.S.A. by Bridgeport Machines Inc. of Bridgeport, Connecticut. This is a used Variable Speed Vertical Milling Machine in GREAT condition. Model #: Series I , Serial #: 12/BR 229755
OKUMA 18" x 50" GAP BED HIGH SPEED ENGINE LATHE
OKUMA 18" x 50" GAP BED HIGH SPEED ENGINE LATHE for sale
Made in Japan by Okuma Machinery Works.
This is a used Geared Head Gap Bed High Speed Engine Lathe in working condition.
Model #: LS | Serial #: 4106-9895
Made in Japan by Okuma Machinery Works.
This is a used Geared Head Gap Bed High Speed Engine Lathe in working condition.
Model #: LS | Serial #: 4106-9895
MORGON MILLING AND DRILLING MACHINE MD-30A
MORGON MILLING AND DRILLING MACHINE MD-30A For Sale
MODEL: MD-30A | SERIAL : 1018
12 SPEEDS MOTOR | VOLTS 115/230 |Hz 60 |PHASE 1
SPINDLE R-8
TABLE: 28-1/2" x 8-1/4" | (4) T-SLOTS
TRAVEL (APPROX)|(Y)6-3/8" |(X) 19"
MODEL: MD-30A | SERIAL : 1018
12 SPEEDS MOTOR | VOLTS 115/230 |Hz 60 |PHASE 1
SPINDLE R-8
TABLE: 28-1/2" x 8-1/4" | (4) T-SLOTS
TRAVEL (APPROX)|(Y)6-3/8" |(X) 19"
Hermes Vanguard 9000 CNC Milling Machine w Computer
Hermes Vanguard 9000 CNC Milling Machine w/ Computer for sale:
Fully functional, gauranteed no DOA Hermes Vanguard 9000 Engraving machine. Item comes with computer with Hermes software, 20+ assorted drill tips, brand new never used maintenance and repair kit, brand new keyboard, computer, monitor, and all programs, assorted literature, parts lists and accessories pamphlets, custom made bracket to hold brass strips for engraving, and Hermes Vanguard Engraving machine .
Fully functional, gauranteed no DOA Hermes Vanguard 9000 Engraving machine. Item comes with computer with Hermes software, 20+ assorted drill tips, brand new never used maintenance and repair kit, brand new keyboard, computer, monitor, and all programs, assorted literature, parts lists and accessories pamphlets, custom made bracket to hold brass strips for engraving, and Hermes Vanguard Engraving machine .
Citizen A-20 Type 6, Swiss Lathe, Bar feed, Suppression
Citizen A-20 Type 6, Swiss Lathe, Bar feed, Suppression For Sale
(1) Citizen A-20 Type VI
(2) C320 Auto-bar loader - magazine style
(3) Cool Blaster High Pressure Coolant System 3 line
(4) Cool Blaster Mist Control Unit
(5) Fire Trace Unit - fire suppression (new $5,500)
(6) Win-CNC Software
Machine new 12/2007 and was installed 1/2008.
Machine is like new condition with a total of 600 Total Hours!!!
(1) Citizen A-20 Type VI
(2) C320 Auto-bar loader - magazine style
(3) Cool Blaster High Pressure Coolant System 3 line
(4) Cool Blaster Mist Control Unit
(5) Fire Trace Unit - fire suppression (new $5,500)
(6) Win-CNC Software
Machine new 12/2007 and was installed 1/2008.
Machine is like new condition with a total of 600 Total Hours!!!
Tuesday, December 7, 2010
Surplus Electrical Equipment Fluke Multimeter Sale Dec 7 2010
December 7 2010
Various Fluke Multimeters and Clamp Meters For Sale - see large selection of electrical equipment below:
Various Fluke Multimeters and Clamp Meters For Sale - see large selection of electrical equipment below:
Surplus Inventory of Banbury Mixers Process Equip Dec 7 2010
Used and Surplus Equipment For Sale
December 7 2010
Inventory of Banbury type mixers for sale - large selection
December 7 2010
Inventory of Banbury type mixers for sale - large selection
Monday, December 6, 2010
Large Inventory of Used Bridgeport Mills and Parts Sale Dec 6 2010
December 6 2010 - Large auction of used and surplus bridgeport mills and parts and spare parts: See auction listings below
Huge Auction of Surplus Spectrum Analyzers For Sale
December 6 2010 -
Huge Auction of Surplus Spectrum Analyzers For Sale - See inventory of spectrum analyzers below
Huge Auction of Surplus Spectrum Analyzers For Sale - See inventory of spectrum analyzers below
Tektronix Oscilloscope Surplus Inventory Sale Dec 6 2010
December 6 2010 - Tektronix Oscilloscope Surplus Inventory Sale -
Large inventory of oscilloscopes for sale, see inventory list below
Large inventory of oscilloscopes for sale, see inventory list below
Sunday, December 5, 2010
Baum 714 Air Feed Paper Folder 14" x 20" For Sale
Baum 714 Air Feed Paper Folder 14" x 20" For Sale
Manufacturer: Baum Folder
Model: 714 Tabletop
Serial Number: 87-I-179
Manufacturer: Baum Folder
Model: 714 Tabletop
Serial Number: 87-I-179
2004 Ingersoll Rand P185WIR Trailered Air Compressor Sale
2004 Ingersoll Rand P185WIR Trailered Air Compressor For Sale
Make: Ingersoll Rand
Model: P185 WIR
Year: 2004
Serial Number: 344879UD0820
Title: Clear
Power Source: Diesel
Hours: 978 showing on working meter
Operating Weight: 1,905 lbs (approx)
Dimensions: 137” (L) x 70" (W) x 66" (H)
Make: Ingersoll Rand
Model: P185 WIR
Year: 2004
Serial Number: 344879UD0820
Title: Clear
Power Source: Diesel
Hours: 978 showing on working meter
Operating Weight: 1,905 lbs (approx)
Dimensions: 137” (L) x 70" (W) x 66" (H)
Surplus Lightnin Mixer Used Equipment Sale Dec 5
December 5 2010
Used and Surplus Equipment Sale
Used Lightnin Mixers and Various Surplus Parts - Bid now below:
Used and Surplus Equipment Sale
Used Lightnin Mixers and Various Surplus Parts - Bid now below:
Saturday, December 4, 2010
HIGH PRESSURE STEAM AUTOCLAVE STERILIZER For Sale Dec 4 2010
HIGH PRESSURE STEAM AUTOCLAVE / STERILIZER For Sale
You are bidding on a high-pressure steam sterilizer / autoclave. After warm up the unwrapped cycle is one minute and the wrapped cycle is 10 minutes. It is an electro mechanical unit thus no expensive computer boards to replace in case of problems. Electronic solid-state modules control timing. This unit is totally constructed of stainless steel with brass and copper piping. The nominal dimensions of the chamber are: 10 inches in diameter and 18 inches long. The overall dimensions of the unit are 23 inches long, 17 inches wide and 19.5 inches high. The unit uses distilled water with no special piping, venting, or drains required. Power requirements are 117 VAC @ 15 amps. This is the normal power outlet found in any home or office. The operating pressure of this sterilizer is 45 lbs; the operating temperature is 275 degrees F - see more info below
You are bidding on a high-pressure steam sterilizer / autoclave. After warm up the unwrapped cycle is one minute and the wrapped cycle is 10 minutes. It is an electro mechanical unit thus no expensive computer boards to replace in case of problems. Electronic solid-state modules control timing. This unit is totally constructed of stainless steel with brass and copper piping. The nominal dimensions of the chamber are: 10 inches in diameter and 18 inches long. The overall dimensions of the unit are 23 inches long, 17 inches wide and 19.5 inches high. The unit uses distilled water with no special piping, venting, or drains required. Power requirements are 117 VAC @ 15 amps. This is the normal power outlet found in any home or office. The operating pressure of this sterilizer is 45 lbs; the operating temperature is 275 degrees F - see more info below
XDR Digital X RAY Intraoral Sensor size 2
XDR Digital X RAY Intraoral Sensor size 2 For Sale
XDR Radiology’s new Comfort Sensor delivers superior image quality combining dramatic spatial and contrast resolution.
XDR’s advanced imaging filters go beyond the limits of film and the human eye to provide simple and high-quality capture from panoramic/cephalometric units, intraoral cameras, scanners, PSP units, and more. XDR’s patented Bi-Directional scaling allows accurate measurements in any direction, enabling the only accurate digital implant overlay available while patented Distortion Correction undoes the effects of projective distortions, allowing for more comfortable sensor placement. Chosen by UCLA’s School of Dentistry, XDR is dramatically easier to use, and bridges with all practice management systems
XDR Radiology’s new Comfort Sensor delivers superior image quality combining dramatic spatial and contrast resolution.
XDR’s advanced imaging filters go beyond the limits of film and the human eye to provide simple and high-quality capture from panoramic/cephalometric units, intraoral cameras, scanners, PSP units, and more. XDR’s patented Bi-Directional scaling allows accurate measurements in any direction, enabling the only accurate digital implant overlay available while patented Distortion Correction undoes the effects of projective distortions, allowing for more comfortable sensor placement. Chosen by UCLA’s School of Dentistry, XDR is dramatically easier to use, and bridges with all practice management systems
MIDMARK M7 SPEEDCLAVE AUTOCLAVE STERILIZER Sale
MIDMARK M7 SPEEDCLAVE AUTOCLAVE STERILIZER For Sale
THIS IS A WORKHORSE M7 IN USED CONDITION WORKING.
THIS IS A WORKHORSE M7 IN USED CONDITION WORKING.
Fluke Clamp Meter Electrical Surplus Auction Sale
December 4 2010
Huge auction of surplus and used and new Electrical equipment.
Fluke Clamp Meters - See inventory listing below:
Huge auction of surplus and used and new Electrical equipment.
Fluke Clamp Meters - See inventory listing below:
Spectrum Analyzer Sale Surplus and Used Auction
December 4 2010
Huge auction of surplus and used spectrum analyzers for sale:
Huge auction of surplus and used spectrum analyzers for sale:
Friday, December 3, 2010
FEELER LATHE, High Precision #FTL-618E For Sale
Used Equipment Auction - FEELER LATHE, High Precision #FTL-618E For Sale
MODEL #FTL-618E
Spindle capacity with round collet 5C collets 1-1/16"
Spindle capacity with hexagon 5C collets 7/8"
Spindle capacity with square 5C collets 3/4"
Spindle capacity with step chucks 1- 1/16-6"
Variable spindle speeds 135-2955 RPM
Swing over bed 11" Cross slide 6" Carriage 9"
Distance between centers 18" | Hole through spindle 1 1'4"
Compound slide travel 3"
MODEL #FTL-618E
Spindle capacity with round collet 5C collets 1-1/16"
Spindle capacity with hexagon 5C collets 7/8"
Spindle capacity with square 5C collets 3/4"
Spindle capacity with step chucks 1- 1/16-6"
Variable spindle speeds 135-2955 RPM
Swing over bed 11" Cross slide 6" Carriage 9"
Distance between centers 18" | Hole through spindle 1 1'4"
Compound slide travel 3"
Takisawa Machine Center MAC-V1 CNC Mill For Sale
Used Equipment For Sale - Takisawa Machine Center MAC-V1 CNC Mill
Table Size: 23.6" x 13.7" Maximumun weight on table: 550 lbs
X-axis travel: 17" Y-axis travel: 13.750"
Z-axis travel: 18.100" Spindle taper: NT40/BT40
Spindle speed: Per Manual - 0 to 6000 RPM Actual -0 to 4000 RPM
Spindle motor: 3.7 KW
Spindle nose to table: 7.8"-26"
Number of tool positions: 10 ATC
Maximum tool diameter: 2 1/2"
Tool change time T to T: 5 seconds
Rapid traverse rates: 945 IPM in X and Y axis
630 IPM in Z aaxis
Machine Dimensions: 109" x 57" x 89"
Machine weight: 4850 lbs
Table Size: 23.6" x 13.7" Maximumun weight on table: 550 lbs
X-axis travel: 17" Y-axis travel: 13.750"
Z-axis travel: 18.100" Spindle taper: NT40/BT40
Spindle speed: Per Manual - 0 to 6000 RPM Actual -0 to 4000 RPM
Spindle motor: 3.7 KW
Spindle nose to table: 7.8"-26"
Number of tool positions: 10 ATC
Maximum tool diameter: 2 1/2"
Tool change time T to T: 5 seconds
Rapid traverse rates: 945 IPM in X and Y axis
630 IPM in Z aaxis
Machine Dimensions: 109" x 57" x 89"
Machine weight: 4850 lbs
Thursday, December 2, 2010
Monarch EE Precision Lathe For Sale
Monarch EE Precision Lathe For Sale
10" X 20" MONARCH PRECISION TOOLMAKER'S LATHE, MODEL: 10EE
MACHINE IS 220V, 3PH.
SPECIFICATIONS:
SWING OVER BED .............................................. 12-1/2"
SWING OVER CROSS SLIDE ............................ 7-1/4"
DISTANCE BETWEEN CENTERS .................... 20"
HOLE THROUGH SPINDLE ................................ 1-13/32"
SPINDLE NOSE, CAMLOCK, TYPE ................... D1-3"
INFINITELY VARIABLE SPINDLE SPEEDS ...... TO 4,000 RPM
HEADSTOCK & TAILSTOCK SPINDLE CENTER TAPER #2 MORSE
TAILSTOCK SPINDLE DIAMETER ..................... 1-1/4"
TAILSTOCK SPINDLE TRAVEL ......................... 3-1/2"
THREADS, INCH (60) ........................................... 3 - 184 T.P.I.
FEEDS, LONGITUDINAL (50) ............................. .0005-.0161 IPR
APPROXIMATE WEIGHT .................................... 3,350 LBS.
APPROXIMATE FLOOR SPACE ....................... 61" x 30"
10" X 20" MONARCH PRECISION TOOLMAKER'S LATHE, MODEL: 10EE
MACHINE IS 220V, 3PH.
SPECIFICATIONS:
SWING OVER BED .............................................. 12-1/2"
SWING OVER CROSS SLIDE ............................ 7-1/4"
DISTANCE BETWEEN CENTERS .................... 20"
HOLE THROUGH SPINDLE ................................ 1-13/32"
SPINDLE NOSE, CAMLOCK, TYPE ................... D1-3"
INFINITELY VARIABLE SPINDLE SPEEDS ...... TO 4,000 RPM
HEADSTOCK & TAILSTOCK SPINDLE CENTER TAPER #2 MORSE
TAILSTOCK SPINDLE DIAMETER ..................... 1-1/4"
TAILSTOCK SPINDLE TRAVEL ......................... 3-1/2"
THREADS, INCH (60) ........................................... 3 - 184 T.P.I.
FEEDS, LONGITUDINAL (50) ............................. .0005-.0161 IPR
APPROXIMATE WEIGHT .................................... 3,350 LBS.
APPROXIMATE FLOOR SPACE ....................... 61" x 30"
Ingersoll Rand 185 Air Compressor Duetz Diesel For Sale
FOR SALE -
Ingersoll Rand 185 Air Compressor Duetz Diesel
Ingersoll Rand 185 Diesel Air Compressor. Duetz air cooled engine. 1999 low hour machine. Starts and runs like new.
Ingersoll Rand 185 Air Compressor Duetz Diesel
Ingersoll Rand 185 Diesel Air Compressor. Duetz air cooled engine. 1999 low hour machine. Starts and runs like new.
Onan Quiet Diesel 7500 generator with exhaust 50 hrs Sale
Onan Quiet Diesel 7500 generator with exhaust 50 hrs For Sale
Max Output (KW): 7.1 - 8
Max Output (KW): 7.1 - 8
Wednesday, December 1, 2010
Winona Van Norman CMC 30 head machine Sunnen Tooling Sale
Winona Van Norman CMC 30 head machine Sunnen Tooling
One good WVN CMC seat and guide machine, comes with Sunnen SGM three angle seat cutting tooling as shown. Machine is very heavy duty and has more capacity than a Sunnen VGS20, will accept a 47 inch long head. Has airfloat head,hydraulic operated tilt and head clamping release, fine downfeed knob, downfeed indicator with stop,spindle rotation adjustable from 48-480 rpm, electronic level assembly, 19 Sunnen pilots, 10 fixed seat pocket cutters with driver,drill chuck,collet chuck,core drills and reamers,spot facers,Sunnen SGM tooling with ball driver. Taper is #3MT. Unit is 220 three phase
One good WVN CMC seat and guide machine, comes with Sunnen SGM three angle seat cutting tooling as shown. Machine is very heavy duty and has more capacity than a Sunnen VGS20, will accept a 47 inch long head. Has airfloat head,hydraulic operated tilt and head clamping release, fine downfeed knob, downfeed indicator with stop,spindle rotation adjustable from 48-480 rpm, electronic level assembly, 19 Sunnen pilots, 10 fixed seat pocket cutters with driver,drill chuck,collet chuck,core drills and reamers,spot facers,Sunnen SGM tooling with ball driver. Taper is #3MT. Unit is 220 three phase
Subscribe to:
Posts (Atom)