Used Davis Standard Co Extrusion Sheet Line
Stock #9540-1
USED 60" DAVIS STANDARD CO-EXTRUSION LINE NEW 1991. LINE CONSISTS OF THE FOLLOWING:
- EXTRUDER A: 100MM DAVIS STANDARD MODEL 100MM35F, 30/1 L/D EXTRUDER. ELECTRICALLY HEATED WATER COOLED, SERIAL #M3027. GEARBOX RATIO IS 17.44/1, NEW 12/91. EXTRUDER IS BELT DRIVEN TO 125 HP RELIANCE DC WITH RELIANCE SCR CONTROL.
- EXTRUDER B: 6" DAVIS STANDARD, MODEL 60IN60TPIH WITH 30/1 L/D NON-VENTED BARREL. ELECTRICALLY HEATED CLOSED LOOP WATER COOLING SYSTEM. NEW 12/91. HAS 17.2/1 GEARBOX RATIO, RATED @ 526 HP, SERIAL #M3019. EXTRUDER IS DRIVEN BY A 500 HP RELIANCE DC MOTOR WITH RELIANCE SCR CONTROL. INCLUDES BERINGER 6" SCREEN CHANGER WITH 2 HP HYDRAULIC PUMP.
- EXTRUDER C: APPROXIMATELY 1.5" DAVIS STANDARD SINGLE SCREW EXTRUDER, 30/1 L/D NON-VENTED BARREL IS ELECTRICALLY HEATED AND WATER COOLED, EXTRUDER IS DRIVEN BY A RELIANCE 20 HP DC MOTOR WITH RELIANCE SCR CONTROL.
- EXTRUDER D: 2.5" DAVIS STANDARD MODEL 25IN25 WITH 24/1 L/D NON-VENTED BARREL, ELECTRICALLY HEATED, WATER COOLED, DRIVEN BY A 50 HP RELIANCE DC MOTOR WITH SCR CONTROL.
- EXTRUDER E: 100MM DAVIS STANDARD 30/1 L/D NON-VENTED BARREL, ELECTRICALLY HEATED, WATER COOLED. GEARBOX RATIO IS 17.44/1, NEW 12/91.
-DOWNSTREAM INCLUDES 30 HP MELT PUMP, CLOEREN CO-EX BLOCK AND CLOEREN 56" FLEX LIP SHEET DIE WITH CENTER BACK FEED AND REPLACEABLE LOWER LIP, SERIAL # 91-922.
- DAVIS STANDARD 60" X 24" O.D. 3-ROLL CHILL ROLL STACK, TYPE DN STK 3-24, SO #DS325, SERIAL #M3039. AIR ACTUATED MIRROR POLISH CHILL ROLLS. INCLUDES ROTARY UNIONS, DOWNSTREAM 16" DIAMETER AUXILIARY COOLING ROLL POSITION AND (3)PUMP ASSEMBLY INCLUDING HEAT EXCHANGERS. HAS 8" X 60" PULL ROLL ASSEMBLY, DRIVEN BY A 3 HP DC MOTOR WITH SCR CONTROL. HAS APPROXIMATELY 10 FOOT LONG COOLING CONVEYOR. LINE PREVIOUSLY INSTALLED AND UTILIZED ON POLYPROPYLENE SHEET.
